AP® CALCULUS BC ONLY · UNIT 7
Approximating Solutions Using Euler’s Method
Follow the current slope, take a step, then repeat. Build accurate Euler tables, compare numerical paths and explain what your approximation means.

1. The Euler update and AP BC scope
Euler’s method (pronounced “OY-ler”) approximates a solution to an initial value problem by repeatedly following a short straight segment with the slope prescribed by the differential equation at the current point. You do not need a closed-form solution to carry out the method.
The initial condition supplies the exact starting point. After the first step, the computed heights are generally estimates. The method still evaluates the given rate at those computed points.
The two updates
Here is the signed horizontal step and is the slope at the current numerical point. In words: new height equals old height plus slope times horizontal change. The equality defines the numerical update; the final numerical height is an approximation to the true solution value.
2. Choose the step and organize the process
| Stage | What to do |
|---|---|
| Start | Read the initial point and the requested target input . |
| Choose the step | For equal steps, use . A target to the left gives a negative step. |
| Find the slope | Calculate using both coordinates from the same current row. |
| Update | Compute and . Do not use a partially updated point to find the old slope. |
| Repeat and stop | The new point becomes the current point. Stop when ; steps give point rows. |
| Report | Write , include units when given, and round only the final result as directed. |
How to find the step size
Four equal steps from to give . If a problem directly specifies , use that value. Five equal steps from to give .
When the step size is fixed, must be a nonnegative integer to reach the target with that many equal steps. Do not silently take a shorter last step when a problem requires equal steps.
Connection to local linearization
Evaluating this line at produces the next estimate. At the initial exact point it is tangent to the true initial-value solution. At a later computed point it is a direction supplied by the equation; the computed point need not lie on the true solution you started with.
3. Eight colorful worked examples
Example 1 · Four steps from the initial point
Use to approximate for , with .
1 · Set up the march
Start at . Each step evaluates at the current point.
2 · Take the first step
The next point is .
3 · Recompute before the second step
4 · Continue from the new point
5 · Finish at the target
Four updates have reached the requested input. This is an Euler estimate, not an exact solution value.
Example 2 · Read the same work in a table
Organize Example 1 without changing the differential equation, starting point or step size.
1 · Keep one point on each row
| Step | Current slope | ||
|---|---|---|---|
| Stop |
2 · Read the final row correctly
The last row gives . The slope column is marked “Stop” because no fifth update is requested. The arithmetic for every update appears in Example 1.
A table is a useful organizing choice. Clear labeled calculations also communicate the method.
Example 3 · Three short steps for exponential growth
Use to approximate for , .
1 · Count and identify the slope
At each point the slope is the current height. The inputs are , , and .
2 · Use each new height on the next step
3 · Label the estimate
For the supplied exact solution , the true value is about . The Euler value is lower in this example.
Example 4 · One step is one local linear estimate
Given and , use one step of size to estimate .
1 · Evaluate the starting slope
2 · Multiply by the horizontal step
3 · Compare with a supplied exact solution
The function satisfies the initial value problem and has . Its positive second derivative explains why the starting tangent line lies below this convex solution.
Example 5 · Find the step size from the number of steps
An initial value problem starts at and must reach in five equal steps. Find the step size and input sequence.
1 · Divide the whole horizontal change
2 · List six points for five moves
The initial point is not a completed step. Five updates produce six point rows.
Example 6 · Move backward with a negative step
For , , estimate using two equal steps.
1 · Keep the direction in the step size
2 · Follow the same update rule
3 · Check the target
| Step | Current slope | ||
|---|---|---|---|
| Stop |
A positive slope with a negative horizontal step gives a negative height change. The formula itself is unchanged.
Example 7 · Compare two step sizes at the same target
Repeat Example 1 with . Compare the eight-step estimate of with the four-step estimate.
1 · Apply the same recurrence eight times
The successive heights, retaining all digits, are , , , , , , , and .
2 · Compare with a verified reference
The supplied exact solution is . Its derivative equals , and it passes through .
| Step size | Steps | Euler estimate | Absolute error |
|---|---|---|---|
3 · State what this comparison establishes
Halving the step improved the result in this example. The estimates are still below the true value. A step-size comparison is evidence for this problem, not a guarantee that every smaller step strictly improves every numerical answer.
Example 8 · Recognize an overestimate in a checked case
Use to estimate for , .
1 · Take two forward steps
2 · Check the error direction
The supplied exact solution is . It is concave down, with . Direct comparison gives an Euler overestimate.
The positive rates get smaller as the numerical heights rise. Reusing the initial slope for both steps would give a different, incorrect Euler calculation.
4. Six verified numerical paths and reference curves
Blue solid lines join Euler points; filled blue circles are the computed points, not exact solution values. Orange dashed curves are supplied exact solutions used to verify the comparisons. The refinement panel also uses a green dash-dot path with square markers. Each panel uses independent horizontal and vertical scales for readability; compare the labeled coordinates rather than visual angles.
Four Euler segments and the exact curve
Smaller steps in the same problem
A single starting tangent segment
Two steps toward smaller inputs
Three updates for a decreasing solution
Finish all four product-rate steps
The plotted intervals are the requested approximation intervals. The endpoints of the numerical paths are the start and target, not domain endpoints of the exact solutions; all six supplied exact solutions are defined for every real input. Abstract coordinates have no specified physical units. A later Euler segment follows the rate at a computed point and is generally not tangent to the original exact curve.
5. Accuracy, concavity and domain checks
Approximation, rounding and error propagation
Euler’s method replaces curved motion with straight steps. Numerical and rounding errors can propagate through later updates; errors need not grow strictly at every step and may cancel. Keep full intermediate precision, store values carefully on a calculator, and follow the problem’s final rounding instruction. Exact fractions are also useful for checking arithmetic.
For sufficiently regular problems on a fixed interval, taking sufficiently small steps improves convergence to the true solution. A large step can be inaccurate or behave badly. This topic focuses on carrying out the requested Euler process; a formal error bound or proof of convergence is not needed for the worked calculations here.
Use concavity carefully
Starting at an exact point, a tangent-line estimate lies below a solution that is concave up across the step, and above a solution that is concave down across the step. For a multistep Euler calculation, later starting points are approximate. Do not automatically call the entire path an overestimate or underestimate from a sketch or one initial concavity value; justify the error direction for the specified equation and interval, or compare with a valid reference solution.
Examples 4 and 8 verify those tangent and error comparisons directly. Example 7 checks the actual final errors at a shared target. A plotted gap is an illustration; the numerical calculation supplies the quantitative comparison.
Check the equation’s domain
Every slope evaluation must use a point where the right side is defined. Do not evaluate a zero denominator, step across an excluded input as though the equation were defined there, or infer a true solution’s global existence from a finite list of numerical points.
Useful special forms
If , a fixed step gives
If , the height change on the current step is . A constant derivative gives an exact straight-line solution, so its Euler values can be exact in exact arithmetic. “Numerical method” does not mean every possible result must have nonzero error.
6. Eight practice questions with complete solutions
1. Update a decreasing numerical solution
Use to approximate for , .
Show complete solution
1 · Recompute every slope
2 · Match the final row to the target
| Step | Current slope | ||
|---|---|---|---|
| Stop |
Check all three current slopes before accepting the final estimate. The final input is , after exactly three updates.
2. Use one growth step
Use one step with to approximate for , .
Show complete solution
1 · Evaluate the given rate
2 · Take the requested step
3. Finish all four product-rate steps
Use four equal steps to approximate for , .
Show complete solution
1 · Find the step and keep the zero first slope
2 · Complete the remaining two steps
3 · Report the fourth height
| Step | Current slope | ||
|---|---|---|---|
| Stop |
The value occurs at , only halfway to the target. It is not the answer at .
4. Recognize an exact straight-line case
Use to approximate for , .
Show complete solution
1 · Add the same rise three times
2 · Check against the linear solution
The exact solution is . Its value at is exactly , so the Euler estimate is exact in this case.
5. Use a specified number of steps
For , , choose five equal steps from to . Find the first new point.
Show complete solution
1 · Compute the step and current slope
2 · Update both coordinates
The first numerical point is . Four further steps would be needed to reach .
6. Take two negative steps
For , , approximate with two equal steps.
Show complete solution
1 · Move left by half a unit per step
2 · Recompute the rate at the next input
The intermediate inputs are , and . The second slope is .
7. Diagnose a partially updated slope
For , , a student uses the point to find the first slope for . Correct the step.
Show complete solution
1 · Use the current pair before changing either coordinate
The mixed point has a new input and an old height. It is not the starting pair.
2 · Apply the correct old slope
8. Keep rates and units in a cooling model
A model uses , with . Time is in minutes and temperature in degrees Celsius; the coefficient has units . Use two one-minute steps to estimate the temperature after two minutes.
Show complete solution
1 · Find the first rate and temperature
The initial rate is .
2 · Use the updated temperature
The numerical temperatures decrease while remaining above the ambient temperature in these two steps.
7. Common mistakes and clear written work
- Omitting the step size. A slope is a rate, not the height change. Multiply by .
- Using a mixed point. Compute before updating either coordinate.
- Reusing an obsolete height or slope. Once a step is complete, use the new pair for the next rate evaluation.
- Confusing the step index with the input. The label counts updates; records the actual input.
- Stopping one row early. Include the initial row and verify the target input before reporting the final height.
- Rounding repeatedly. Retain extra digits or exact fractions until the end; check multiplication and addition separately.
- Losing the direction. A target to the left requires a negative step.
- Using an undefined rate. Check original denominator restrictions and the equation’s domain before evaluating slopes.
- Claiming an exact answer without justification. Use an approximation sign unless an exact case has been verified.
- Skipping the method. Show the requested step size, rate evaluations and updates rather than only an unexplained final decimal.
A clear written response
Identify the initial condition, write the update with the requested step size, show each evaluated slope or a labeled table, verify the final input, then state the estimated value with units when appropriate. Follow the precision requested in the question. These habits make the mathematics checkable; the points on any particular AP question depend on that question’s scoring guidelines.
8. Frequently asked questions
Is Euler’s method required for AP Calculus AB?
No. Topic 7.5 is marked BC only in the AP Calculus course framework. The earlier slope-field topics are shared by AB and BC.
Do I need to solve the differential equation first?
No. The given rate and initial point are enough for the numerical updates. Exact solutions on this page are supplied to check selected examples and graphs.
Which point supplies the next slope?
Use the current numerical pair . After both updates are finished, the new pair supplies the slope for the following step.
How many rows should the table have?
For steps, include point rows: the initial point and one new point per update. An extra slope at the final target is unnecessary unless another step is requested.
Can the step size be negative?
Yes. Use . A smaller target input makes the step negative, and the same recurrence applies.
Do smaller steps always give a strictly better answer?
Not as an unconditional claim for every individual step size and problem. With suitable regularity and sufficiently small steps, refinement improves convergence. Compare at the same target, retain precision, and check the actual equation.
When should I round and how should I report the answer?
Keep intermediate digits or exact fractions. Round the final value as directed and write , with units if the variables have physical meaning. Some linear cases can be exact and should be identified with a valid check.
9. Continue through Unit 7
Euler’s method turns the local directions in a slope field into a numerical path. Continue to separation of variables to learn when an equation can also be solved symbolically.
Use the numerical update when an Euler approximation is requested, even if an exact solution is available. The exact solution and the requested numerical estimate answer different instructions.