AP® CALCULUS AB & BC · UNIT 7

Reasoning Using Slope Fields

Use a slope field to explain how a solution changes. Connect slope signs, equilibria, concavity and initial conditions while respecting the equation and its domain.

Topic 7.4 study notes8 worked examples · 8 practice questionsUpdated 11 November 2026
Calculus notebook with limit and integral symbols, a compass and pencil on an olive and cream study desk

1. Reason about solution functions and families

A slope field gives local tangent directions for a first-order differential equation. Reasoning with it means explaining the behavior of solution functions: how they rise or fall, how their slopes change, and which solution fits an initial condition.

AP Calculus AB and BC · Topic 7.4. The course framework identifies FUN-7.C, FUN-7.C.3 and skill 4.D: reason about solutions as functions or families of functions and use appropriate graphing techniques.
dydx=f(x,y)

At a point (a,b) on a solution, its derivative equals f(a,b). Read the field from left to right as x increases. The segment indicates a local slope; a solution curve must match the field direction at its own points.

An initial condition y(x0)=y0 identifies a point on the desired solution. It does not change the field. You can justify many conclusions using signs and patterns without deriving a closed-form solution.

2. A checklist for reading solution behavior

Reasoning questions and the evidence they need
QuestionHow to justify the answer
Increasing or decreasingCheck the sign of dydx along the solution. Positive means increasing; negative means decreasing.
EquilibriumTest a constant function y=c: its derivative is zero, so require f(x,c)=0 throughout the interval.
Stability near an equilibriumFor an autonomous equation dydx=g(y), test the sign of g immediately above and below each equilibrium.
ConcavityCheck d2ydx2, or compare signed slopes while following the same solution to the right.
Long-term behaviorCheck that the solution continues for arbitrarily large x; use the equation to justify a proposed limit rather than relying only on a finite plot.
Comparing solutionsUse their initial positions and a valid uniqueness argument on their common interval of existence.

Slope, height and concavity answer different questions

A positive value of y does not imply a positive derivative. A zero derivative at one point gives a horizontal tangent, not an automatically constant solution. A zero second derivative at one point does not by itself establish an inflection point.

For concavity, compare signed slopes along one solution. Slopes changing from −3 to −1 are increasing, so that behavior is concave up even though the solution is decreasing and becoming less steep.

Autonomous equations and phase-line language

When the right side is a function of y alone, equilibrium values split the vertical axis into sign regions. In the examples below, a stable, attracting equilibrium draws nearby solutions toward it from both sides as x increases. An unstable, repelling equilibrium sends nearby solutions away. A semistable equilibrium attracts on one side and repels on the other.

These descriptions concern nearby behavior. A local stability classification does not automatically describe every possible initial condition.

3. Eight colorful worked examples

Example 1 · Read increasing and decreasing behavior

For dydx=y, where are solutions increasing?

1 · Use the sign of the prescribed derivative

dydx>0⟺y>0

Above the horizontal axis, solution slopes are positive. Below it, they are negative.

2 · Include the equilibrium solution

Solutions increase while y>0 and decrease while y<0. The constant function y=0 is also a solution, since both sides are zero throughout the interval.

Example 2 · Find constant equilibrium solutions

Find the equilibria of dydx=y(3−y).

1 · Set the autonomous rate equal to zero

y(3−y)=0
y=0
y=3

2 · Verify the constant functions

Each constant function has derivative zero and makes the right side zero for every input. Thus y=0 and y=3 are equilibrium solution curves, not just isolated points.

Example 3 · Classify stability using both neighboring regions

Analyze the equilibria of dydx=y(3−y).

1 · Check signs in all three regions

Signs between the equilibrium rows
RegionSign of the rateBehavior as the input increases
y<0−Decreases
0<y<3+Increases
y>3−Decreases

2 · Compare directions near each equilibrium

Near y=0, a negative value moves downward and a positive value moves upward. Both move away, so y=0 is unstable.

Near y=3, values just below rise and values just above fall. Both move toward the equilibrium, so y=3 is stable and attracting.

A solution initially between 0 and 3 stays between those equilibria and increases toward 3 as the input grows.

Example 4 · Determine concavity along a solution

For dydx=x−y, determine where solution curves are concave up.

1 · Differentiate along the solution

d2ydx2=1−dydx

The derivative of the dependent variable is its derivative, not zero or one.

2 · Substitute the original equation

d2ydx2=1−x+y

3 · Interpret the sign

Solution curves are concave up where y>x−1 and concave down where y<x−1. Along y=x−1, the straight-line function itself satisfies the equation and has zero second derivative. A zero-curvature location is not automatically an inflection.

Example 5 · Justify a long-term limit

For dydx=2−y, describe solutions as x→∞.

1 · Identify the equilibrium and nearby directions

2−y=0⟺y=2

Above 2, the rate is negative. Below 2, it is positive. The equilibrium attracts from both sides.

2 · Confirm that the trend continues

The family below is supplied as an algebraic check; deriving it is not needed for slope-field reasoning.

y=2+Ce−x

Its derivative is −Ce−x, which equals 2−y. Every real constant C gives a solution defined for all real inputs.

limx→∞y(x)=2

This includes the equilibrium member C=0. The conclusion follows from the equation and verified family, rather than just the visible window.

Example 6 · Compare two solutions on a common interval

For dydx=x+y, suppose y1(0)=1 and y2(0)=2. Compare y1(5) and y2(5).

1 · Use the initial ordering and uniqueness

The right side is smooth, so solutions through an initial point are locally unique. The higher solution cannot pass through the lower one on a common interval where both exist.

y2(0)>y1(0)

2 · Verify the comparison at the requested input

The supplied family y=Cex−x−1 satisfies this equation for all real inputs. The initial values select C=2 and C=3, respectively.

y2(x)−y1(x)=ex>0
y2(5)>y1(5)

Both solutions exist at the requested input, and the ordering is preserved.

Example 7 · Analyze both equilibria and a selected solution

For dydx=y2−4, find equilibria, classify stability, identify increasing regions and find the forward limit when y(0)=1.

1 · Factor and test all regions

y2−4=(y−2)(y+2)

The constant solutions are y=−2 and y=2.

Correct sign directions for the quadratic equation
RegionSign of the rateForward behavior
y<−2+Increases toward −2 near that equilibrium
−2<y<2−Decreases toward −2
y>2+Increases away from 2

2 · Classify each equilibrium from both sides

Below −2, nearby solutions rise; above −2, they fall. Both directions point toward −2, so the lower equilibrium is stable.

Near 2, solutions move away on both sides, so the upper equilibrium is unstable. Solutions increase where y<−2 or y>2, and decrease where −2<y<2.

3 · Follow the initial condition and check the limit

The initial value 1 lies between the equilibria. Its solution remains in that interval and decreases toward the stable lower equilibrium. A supplied exact check is

y(x)=2(3−e4x)3+e4x

The denominator is positive for every real input. The function satisfies the equation and has y(0)=1. It remains above −2 at every finite input, with

limx→∞y(x)=−2

Example 8 · Recognize one-sided attraction and domain limits

Classify the equilibrium of dydx=y2. Compare nearby starting values below and above zero.

1 · Test both sides of the equilibrium

The equilibrium is y=0. The derivative is positive on both sides. A nearby negative solution rises toward zero; a nearby positive solution rises away from zero. This is a semistable equilibrium.

2 · Check explicit representatives

y−(x)=−1x+1
y+(x)=11−x

The first has y−(0)=−1, is defined for x>−1, and approaches zero as the input tends to positive infinity. The second has y+(0)=1 and a maximal interval through zero of (−∞,1). It grows without bound as x→1−.

A solution need not exist for arbitrarily large inputs, even when the right side of its differential equation is smooth.

4. Six verified diagrams of solution behavior

Follow each field from left to right. The five slope-field panels use equal physical coordinate scales so their segment angles represent the stated derivatives. The comparison panel uses independent scales and displays solution curves only.

Slope sign determines rising or falling

image/svg+xml Matplotlib v3.11.2, https://matplotlib.org/ −2 −1 0 1 2 x −2 −1 0 1 2 y
For dydx=y, the solid blue curve y=ex rises; the purple dash-dot curve y=−ex falls. The green dashed line y=0 is an equilibrium solution.

Attraction and repulsion at equilibrium rows

image/svg+xml Matplotlib v3.11.2, https://matplotlib.org/ −2 −1 0 1 2 x −1 0 1 2 3 4 y
For dydx=y(3−y), the green dashed row y=3 attracts nearby solutions; the purple dotted row y=0 repels them. Short segments show the sign in each region.

Compare slopes along the same solution

image/svg+xml Matplotlib v3.11.2, https://matplotlib.org/ −2 −1 0 1 2 x −3 −2 −1 0 1 2 3 y
For dydx=x−y, the solid orange curve y=x−1+12e−x is concave up. The blue dash-dot curve y=x−1−12e−x is concave down. The gray dashed line y=x−1 is a straight-line solution.

Approaching a stable limiting value

image/svg+xml Matplotlib v3.11.2, https://matplotlib.org/ 0 1 2 3 4 x −1 0 1 2 3 4 y
For dydx=2−y, the solid orange curve y=2+e−x falls and the blue dash-dot curve y=2−e−x rises toward the green dashed equilibrium y=2. The marked initial points are (0,3) and (0,1).

Different initial values preserve their ordering

image/svg+xml Matplotlib v3.11.2, https://matplotlib.org/ −1 0 1 x 0 1 2 4 6 y
The blue solid and orange dash-dot curves solve dydx=x+y, with initial points (0,1) and (0,2). The plot illustrates the ordering near those inputs; the positive difference ex justifies it also at x=5, outside this window.

The lower equilibrium is stable

image/svg+xml Matplotlib v3.11.2, https://matplotlib.org/ −2 −1 0 1 2 x −3 −2 −1 0 1 2 3 y
For dydx=y2−4, the green dashed row y=−2 attracts from both sides and the purple dotted row y=2 repels. The solid orange solution through (0,1) decreases toward −2.

All variables in these abstract examples have no specified physical units. Filled dots mark initial conditions. The curves continue beyond the viewing windows on their stated domains; no window edge is a mathematical endpoint. Short-stroke endpoints are drawing endpoints, not solution-domain boundaries. Color is supplemented by line style and orientation.

5. Equilibria, uniqueness and limits

Zero slope, equilibrium and concavity boundaries

A zero-slope set satisfies f(x,y)=0. A constant equilibrium requires an entire horizontal solution y=c. For dydx=x−y, horizontal tangencies occur on y=x, while zero second derivative occurs on y=x−1. Those are different conditions.

Uniqueness and solution ordering

For the smooth right-side functions used here, local uniqueness prevents distinct solutions from passing through the same point on a common interval. State that condition when using no crossing to justify ordering. Arbitrary differential equations need not have uniqueness.

What a finite field cannot establish alone

A finite diagram can suggest a trend. To claim an exact limit, check the equation, the relevant region and whether the selected solution continues for arbitrarily large inputs. Equilibrium roots alone do not determine which root a particular solution approaches.

For an autonomous equation with continuous right side, a finite forward limiting value of a solution existing for all sufficiently large inputs must be an equilibrium value. Solutions may instead be unbounded or have a finite endpoint of existence.

6. Eight practice questions with complete solutions

1. Find all equilibria

For dydx=(y−1)(y−3), find all constant equilibrium solutions.

Show complete solution

1 · Set the rate to zero

(y−1)(y−3)=0
y=1
y=3

2 · Check the constant functions

Each constant function has derivative zero and makes the right side zero. Both are equilibrium solutions.

2. Classify both equilibria

For dydx=(y−1)(y−3), classify the equilibria found in the first question.

Show complete solution

1 · Test all sign regions

Signs for the shared practice equation
RegionSign of the rateBehavior
y<1+Increases
1<y<3−Decreases
y>3+Increases

2 · Interpret nearby directions

Near 1, solutions below rise and solutions above fall, so y=1 is stable and attracting. Near 3, solutions below fall and solutions above rise, so y=3 is unstable.

3. Identify increasing regions

For dydx=(y−1)(y−3), where are solutions increasing?

Show complete solution

1 · Require a positive rate

(y−1)(y−3)>0

2 · Interpret the product signs

The product is positive for y<1 or y>3. It is negative for 1<y<3, and zero at the equilibrium values. Increasing behavior concerns the rate, not whether the height itself is positive.

4. Use the initial point to select the limit

For dydx=(y−1)(y−3) with y(0)=2, find limx→∞y(x).

Show complete solution

1 · Locate the solution between equilibrium barriers

The initial value lies between 1 and 3, where the rate is negative. Smoothness and uniqueness keep this solution between those equilibria as it decreases toward the stable lower one.

2 · Confirm the limit with a supplied check

y(x)=1+3e−2x1+e−2x

This function has y(0)=2, satisfies the equation and is defined for all real inputs. Therefore

limx→∞y(x)=1

5. Decreasing and concave up can occur together

For dydx=x−y with y(0)=2, find the first and second derivatives at the initial point.

Show complete solution

1 · Evaluate the first derivative

y′(0)=0−2=−2

2 · Differentiate along the solution

d2ydx2=1−dydx
y″(0)=1−(−2)=3

The solution is locally decreasing and concave up at the initial point. Its negative slopes are increasing toward less-negative values.

6. Reverse the one-sided attraction

Classify the equilibrium of dydx=−(y+1)2.

Show complete solution

1 · Find the zero and rate signs

The equilibrium is y=−1. The derivative is negative on both sides of this value.

2 · Follow nearby solutions as the input increases

Above −1, decreasing solutions move toward it. Below −1, decreasing solutions move away. The equilibrium is semistable: attracting from above and repelling from below.

7. A horizontal tangent is not a constant solution

For dydx=y−x with y(0)=0, describe the tangent and concavity at the initial point.

Show complete solution

1 · Evaluate the derivative and differentiate again

y′(0)=0
d2ydx2=dydx−1
y″(0)=−1

2 · Interpret the two conditions

The initial tangent is horizontal and the curve is concave down there. By the second derivative test, it is a local maximum. The solution is not constant: the supplied function y=x+1−ex verifies the equation and initial condition.

8. Check whether the solution reaches arbitrarily large inputs

The function y=tanx, with angles in radians, solves dydx=1+y2 and has y(0)=0. Can this solution be used to take a limit as x→∞ on its interval through zero?

Show complete solution

1 · Verify the supplied function

ddxtanx=sec2x=1+tan2x

2 · Preserve its interval of existence

The maximal interval through zero is (−π2,π2). The solution becomes unbounded as x→(π2)−. It does not extend as a finite differentiable solution through that endpoint, so a forward limit at positive infinity is not available on this interval.

7. Common reasoning mistakes

  • Use the sign of the derivative: height and rate are different quantities.
  • Check every equilibrium from both sides: a single sign region cannot establish two-sided attraction or repulsion.
  • Follow a solution when discussing concavity: moving along an arbitrary row of the diagram is not the same thing.
  • Separate a horizontal tangent from equilibrium: the derivative must vanish throughout the constant solution’s interval.
  • State uniqueness and common-domain assumptions: use them before claiming solution ordering.
  • Justify limits beyond the window: check forward existence and the selected initial condition.
  • Respect equation restrictions: no field segment is defined where the right side is undefined.

8. Write a clear AP-style justification

Identify the relevant point or sign region, refer explicitly to the derivative equation, and explain the resulting behavior as the input increases. Include all equilibrium cases and any interval restriction. A graph supports the argument; a conclusion needs the mathematical reason behind it.

For an increasing or decreasing claim, cite the sign of the first derivative on the relevant region. For concavity, cite the second derivative or explain how signed slopes change along the solution. For stability, describe the behavior on both sides of the equilibrium.

Quick reference: locate the initial point → check rate signs → test constant solutions → follow slopes along the selected curve → justify any comparison or long-term conclusion.

9. Questions about reasoning with slope fields

Does a positive height mean that the solution is increasing?

No. Increasing behavior depends on dydx>0. In dydx=y2−4, a negative height below −2 gives a positive derivative.

Does zero slope at a point give an equilibrium?

No. It gives a horizontal tangent at that point. A constant equilibrium function y=c must satisfy f(x,c)=0 throughout its interval.

Which direction determines stability?

Analyze nearby solutions as x increases. Attraction or repulsion refers to their movement toward or away from the equilibrium value in that forward direction.

Can a decreasing solution be concave up?

Yes. For example, signed slopes changing from −3 to −1 are increasing. The solution is decreasing while its negative slopes become less steep.

Must every solution approach an equilibrium?

No. A solution can be unbounded or have a finite endpoint of existence. A finite limiting value of a forward-existing autonomous solution, with continuous right side, must be an equilibrium value, but such a finite limit need not exist.

Why do some comparisons use a no-crossing argument?

When local uniqueness holds, distinct solutions cannot pass through the same point on a common interval. The smooth right sides in these examples have that property; it is not automatic for every differential equation.

Do I need to find a formula for every solution?

No. Slope signs, equilibrium barriers and initial conditions often justify the required qualitative conclusion. Supplied formulas on this page provide additional checks without requiring you to derive them.

10. Continue through Unit 7

Topic 7.3 builds the field. This topic uses it to reason about functions and families of solutions. Numerical approximation and algebraic solution methods come next.

Use the equation to support what you see, and state which solution and interval your conclusion describes.