AP® CALCULUS AB & BC · UNIT 4

Straight-Line Motion

Connect position, velocity, and acceleration. Use derivative signs and graphs to find direction, changes in speed, and total distance.

Topic 4.2 study notes4 worked examples · 3 practice problemsUpdated 10 November 2026
Calculus notebook with limit and integral symbols, a compass and pencil on an olive and cream study desk

1. Connect position, velocity, and acceleration

Choose a positive direction along the line. These examples use right as positive, with time t measured in seconds and position s(t) in meters.

v(t)=s′(t)=dsdt
a(t)=v′(t)=s″(t)
a(t)=dvdt=d2sdt2

Scroll the table sideways to see the meanings.

What each motion quantity measures
QuantityUnitsMeaning
Position s(t)mLocation relative to the chosen origin.
Velocity v(t)msInstantaneous rate of change of position. Its sign gives the direction of motion.
Speed |v(t)|msMagnitude of velocity. Speed is always nonnegative.
Acceleration a(t)ms2Instantaneous rate of change of signed velocity.

Read velocity as the slope of the position graph, and read acceleration as the slope of the velocity graph.

2. Read direction and speed from signs

  1. Find the direction from velocity.

    Positive velocity means motion to the right. Negative velocity means motion to the left.

  2. Find how velocity changes from acceleration.

    Positive acceleration increases signed velocity. Negative acceleration decreases signed velocity.

  3. Use both signs to describe speed.

    Matching nonzero signs mean speed is increasing. Opposite signs mean speed is decreasing.

  4. Check both sides of a stop.

    A particle is at rest when v(t)=0. A change in the sign of velocity across that time indicates a reversal.

Scroll the table sideways to see the direction and speed.

Direction and changes in speed from the signs of velocity and acceleration
VelocityAccelerationDirectionSpeed
PositivePositiveRightIncreasing
PositiveNegativeRightDecreasing
NegativePositiveLeftDecreasing
NegativeNegativeLeftIncreasing

When v(t)>0, the derivative of speed is a(t). When v(t)<0, it is −a(t) because speed equals −v(t) there. Split the time interval where either sign can change, then test each open subinterval.

A stop can occur without a reversal.

For v(t)=(t−2)2, the particle stops at t=2 and moves right on both sides of that instant.

3. Four worked examples

Worked example 1

Differentiate position twice

A particle has position s(t)=t3−6t2+9t+2. Find its velocity and acceleration.

1 · Find the derivative of position

v(t)=3t2−12t+9

With position in meters and time in seconds, velocity is measured in ms.

2 · Differentiate velocity

a(t)=6t−12

Acceleration is measured in ms2. At t=2, the velocity is −3 meters per second and the acceleration is zero. The particle is moving left at that instant.

Worked example 2

Interpret velocity and acceleration signs

Suppose v(4)<0 and a(4)>0. Describe the motion at t=4.

1 · Read the direction

Negative velocity means the particle is moving left.

2 · Check how speed changes

Velocity and acceleration have opposite signs, so the particle is slowing down. If v(4)<0 and a(4)<0, it is moving left and speeding up because the signs match.

Worked example 3

Compute distance and displacement

Velocity is v(t)=4−2t meters per second for 0≤t≤5. Find displacement and total distance.

1 · Find the turning time and a position function

v(t)=0⟹t=2

Velocity is positive before 2 seconds and negative after. One position function is s(t)=4t−t2, whose derivative is 4−2t. Adding a constant to this position leaves all position changes the same.

2 · Find the positions

s(0)=0,s(2)=4,s(5)=−5

The particle moves from position 0 to position 4, then from position 4 to position −5, in meters.

3 · Separate net change from total travel

Displacement=s(5)−s(0)=−5m
Distance=|s(2)−s(0)|+|s(5)−s(2)|
Distance=4+9=13m

Average velocity is −5m5s=−1ms. Average speed is 13m5s=2.6ms.

Worked example 4

Compare the extrema of position and speed

Use s(t)=t3−6t2+9t+2 from Example 1 on 0≤t≤4.

1 · Check position at the endpoints and where velocity is zero

v(t)=3(t−1)(t−3)
s(0)=s(3)=2,s(1)=s(4)=6

The minimum position is 2 meters at t=0 and t=3. The maximum is 6 meters at t=1 and t=4.

2 · Include where acceleration is zero for speed

a(2)=0,|v(2)|=3

Speed is 9 meters per second at both endpoints, zero at t=1 and t=3, and 3 meters per second at t=2. The absolute maximum speed is 9 meters per second, and the absolute minimum speed is zero. The speed at t=2 is a local maximum because speed increases just before that time and decreases just after it.

4. Read the three motion graphs together

The three graphs use Example 1 on 0≤t≤4. Match the same time across the panels and use each vertical axis for its own units.

Position

Position rises to s(1)=6, falls to s(3)=2, and rises again. The horizontal tangents at t=1 and t=3 match zero velocity.

Velocity

Velocity crosses zero at t=1 and t=3. Its minimum is v(2)=−3 meters per second, where its slope is zero.

Acceleration

Acceleration crosses zero at t=2. At that time the velocity graph is below zero, so the particle is moving left.

Scroll the sign chart sideways to see the motion on each interval.

Sign chart for the plotted motion
Time in secondsVelocityAccelerationMotion
0<t<1PositiveNegativeRight, slowing down
1<t<2NegativeNegativeLeft, speeding up
2<t<3NegativePositiveLeft, slowing down
3<t<4PositivePositiveRight, speeding up

5. Three practice problems

Work through each prompt before opening the notebook solution.

Practice 1. Find velocity and acceleration

Given s(t)=2t3−9t2+12t, find v(t) and a(t).

Show solution 1

Notebook solution

1 · Differentiate position

v(t)=6t2−18t+12

2 · Differentiate velocity

a(t)=12t−18

Practice 2. Find rest times and direction

Given v(t)=t2−4 for t≥0, when is the particle at rest, moving right, or moving left?

Show solution 2

Notebook solution

1 · Factor velocity

v(t)=(t−2)(t+2)

On t≥0, the factor t+2 is positive. The factor t−2 determines the direction.

2 · Apply the time domain

The particle is at rest at t=2. It moves left for 0≤t<2 and right for t>2.

Practice 3. Find acceleration and its units

Let s(t)=sin(t), with position in meters and t in seconds. Find a(t) and its units. Use radians for the sine model.

Show solution 3

Notebook solution

1 · Find velocity

v(t)=cos(t)

2 · Differentiate and attach units

a(t)=−sin(t)

Acceleration is measured in ms2, since it gives the change in velocity per second.

6. Check an AP response

  • For direction, state the sign of velocity and respect the time domain.
  • For changes in speed, support the conclusion with the signs of both velocity and acceleration.
  • For total distance, split at reversals and add the magnitudes of the position changes. Displacement uses only the final and initial positions.
  • For absolute extrema, compare endpoints and interior critical times of the requested quantity. For smooth velocity, check zeros of acceleration where velocity is nonzero, as well as zeros of velocity, when optimizing speed.

Unit 8 gives an integral method for total distance. When you know velocity, integrate its magnitude over the time interval.

Total distance=∫t0t1|v(t)|dt

7. Continue studying Unit 4

Use the same approach to interpret rates in other applied settings.